

- Onsip provisioning polycom 411 update#
- Onsip provisioning polycom 411 archive#
- Onsip provisioning polycom 411 upgrade#
- Onsip provisioning polycom 411 software#
Onsip provisioning polycom 411 archive#
Onsip provisioning polycom 411 upgrade#
If this is for a single Upgrade the username can be PlcmSpIp and the password PlcmSpIp as this is the factory default of the phone Download the latest Phone Software from => here here Specific Customer configurations parameters that cannot be changed via the Web Interface (UCS 3.3.0 introduced a large scope of changes and the new UCS 4.0.0 has enhanced this functionality even more) require the usage of configuration files being loaded from the provisioning server.Log Files for Support troubleshooting prior to UCS 4.0.0.The Server directory should contain the unzipped Version of either UCS or SIP Software (depending on the compatible version) Use the standard => Password -app.log and -boot.log files.Press Setup or Cancel and then Setup when the countdown is being displayed.Reboot the Phone (unplug Ethernet cable and plug back in) To manually point the Phone to a Provisioning Server please do the following Steps: NOTE: Please remember that you may need to require to add a local Firewall Rule or Disable the Firewall completely ! Pointing a Phone to an Provisioning Server manually:

If a Poly Phone is used in a non-supported Environment the End Customer is responsible for setting up a local Provisioning Server.Īdditional filtering can utilise the DHCP Vendor Option 60 as explained => here Logging > Module Log Level Limits > DHCP Client > Event 3 will show the received Option in the logs The above would use as the password or the phone would interpret the as the separator between the password and the IP Address or URL. This is submitted via a DHCP String and could be in one of the following formats:Ī Username & Password could also be: If the password as an example contains an please replace this with correct ASCII Encoding for the character in this case or URL Poly Phones delivered from the Factory are preconfigured to be using DHCP Custom Option 160 or 161 (If ordered as Skype for Business SKU) and then Option 66 to inform themselves about the location of a potential Provisioning Server.Īnd then select the actual new Option 160 or 161Ībove Example uses the Standard Provisioning Factory Default Username of PlcmSpIp and the Password PlcmSpIp and would utilize these using FTP as the protocol and 10.252.149.100 as the Server IP or Hostname. Local provisioning automated DHCP Server Options: Please check the Polycom UC Software 4.0.x Upgrade and Downgrade Methods (Engineering Advisory 64731).
Onsip provisioning polycom 411 update#
This will downgrade the compatible phones to UCS 3.3.2 and you then can update to any other UCS 3.3.x Version or Downgrade to SIP 3.2.x If the phone is running the new version of UC Software you will need to download the compatible Downgrader (Example Polycom UC Downgrader 4.5.0B Utility) We no longer host the BootROM Downgrader Software! Usually, this is archived via downloading a compatible SIP / UC Software Revision from => here here here here here here here here here <=.
